Nissan Murano: Removal and Installation / Instrument Panel Tweeter

Front Door Speaker

Removal and Installation REMOVALRemove front door finisher. Refer to Removal and Installation. Disconnect the harness connector (A) from front door speaker and remove screws to remove front door speaker (1)...

Front Auxiliary Input Jacks

Removal and Installation REMOVALRemove shift selector finisher. Refer to Exploded View. Release pawls and remove front auxiliary input jacks (1). : PawlINSTALLATIONInstallation is in the reverse order of removal...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0127 Iat Sensor

DTC Description DTC DETECTION LOGICRationally incorrect voltage from the sensor is sent to ECM, compared with the voltage signal from engine coolant temperature sensor. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0127 IAT SENSOR-B1 (Intake air temperature too high) Diagnosis condition — Signal (terminal) Voltage signal transmitted from intake air temperature sensor to ECM Threshold Rationally incorrect voltage from the sensor is sent to ECM, compared with the voltage signal from engine coolant temperature sensor Diagnosis delay time — POSSIBLE CAUSE Harness and connectors (The sensor circuit is open or shorted) Intake air temperature sensor FAIL-SAFENot applicable DTC Confirmation Procedure PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test...

Nissan Murano (Z52) 2015-2024 Service Manual: Luggage Side Upper Finisher

Removal and Installation REMOVALRemove luggage side upper finisher bolt (A). Using a suitable tool release pawls and remove second row seat belt d-ring finisher. Remove second row seat belt d-ring anchor bolt and remove second row seat belt d-ring. Using a suitable tool release clips, disconnect the harness connector (LH) and remove the luggage side upper finisher...