Nissan Murano: Instrument Panel Assembly / Instrument Finisher a

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Instrument Panel :: Removal and Installation / Instrument Panel Assembly / Instrument Finisher a

Removal and Installation

REMOVAL

Release clips using a suitable tool and remove instrument finisher A.

: Metal clip

INSTALLATION

Installation is in the reverse order of removal.

Instrument Panel Assembly

Removal and Installation CAUTION: Be careful not to scratch instrument panel pad and other parts. Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect components from damage...

Instrument Finisher B

Removal and Installation REMOVALRemove cluster lid A. Refer to Removal and Installation. Release pawls using a suitable tool and remove instrument finisher B...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Body Side Trim

Exploded View 1. Center pillar upper finisher 2. Front door welt 3. Front pillar finisher 4. Dash side finisher 5. Front outer kicking plate 6. Front inner kicking plate 7. Center pillar lower finisher 8. Rear door welt 9...

Nissan Murano (Z52) 2015-2024 Service Manual: U1040 Eng Comm Circuit

DTC Description DTC DETECTION LOGICWhen ECM unable to transmit engine communication signal. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U1040 Engine communication line Diagnosis condition Ignition switch ON Signal (terminal) Engine communication signal Threshold ECM unable to transmit engine communication signal Diagnosis delay time — POSSIBLE CAUSE Harness and connectors (Engine communication line is open or shorted...