Nissan Murano: Lights / Fog lights (if so equipped)
For additional information on fog light bulb
replacement, refer to the instructions outlined
in this section.
Replacing the LED fog light bulb
If LED fog light bulb replacement is required,
it is recommended that you visit a
NISSAN dealer for this service.
For additional information on headlight
bulb replacement, refer to the instructions
outlined in this section.
Replacing the halogen headlight bulb (if so equipped)
If bulb replacement is required, it is recommended
that you visit a NISSAN dealer for
this service...
* It is recommended that you visit a NISSAN dealer for replacement.
Always check with the Parts Department at a NISSAN dealer for the latest
parts information...
Other information:
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
B2556
PUSH-BTN IGN SW
(Push-button ignition switch)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
—
Threshold
BCM detects the ignition switch stuck at ON for 100 seconds or more
Diagnosis delay time
—
POSSIBLE CAUSE
Push-button ignition switch
BCM
Harness or connector
(Ignition switch circuit is shorted...
Diagnosis Procedure
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to Work Procedure.
Is the inspection result normal?
YES>>
Inspection End.
NO>>
GO TO 2.
CHECK ENCODER (FRONT LH) CIRCUIT
Check encoder (front LH) circuit...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more