Nissan Murano: Lights / Exterior and interior lights

* It is recommended that you visit a NISSAN dealer for replacement.
Always check with the Parts Department at a NISSAN dealer for the latest
parts information.

- Map light
- Headlight assembly
- Personal light
- Door mirror turn signal light
- Fog light (if so equipped)
- High-mounted stop light
- License plate light
- Backup (reversing) light assembly
- Rear combination light
- Cargo light
- Daytime running light

Replacement procedures
All other lights are either type A, B, C or D.
When replacing a bulb, first remove the
lens, lamp and/or cover.
Indicates bulb removal
Indicates bulb installation
For additional information on fog light bulb
replacement, refer to the instructions outlined
in this section.
Replacing the LED fog light bulb
If LED fog light bulb replacement is required,
it is recommended that you visit a
NISSAN dealer for this service...
Other information:
Description
Zero point reset is an initializing procedure for the OCS (weight) sensors that must be performed using CONSULT when removing and installing passenger seat or servicing the OCS system, including removing or installing OCS control unit and sensors...
Precautions for Body Repair
WARNING:
The repair information in this section is intended for trained body repair technicians who have attained a high level of skill and experience (e.g. ASE Collision Repair Certification, I-CAR Professional Development Program [PDP] training, etc...