Nissan Murano: Diagnosis System (bcm) / Flasher
CONSULT Function (BCM - FLASHER)
ECU IDENTIFICATION
The BCM part number is displayed.
SELF DIAGNOSTIC RESULT
Refer to DTC Index.
DATA MONITOR
|
Monitor Item [Unit]
| Description |
| REQ SW -DR [On/Off] |
Indicates condition of door request switch LH. |
| REQ SW -AS [On/Off] |
Indicates condition of door request switch RH. |
| PUSH SW [On/Off] |
Indicates condition of push-button ignition switch. |
| TURN SIGNAL R [On/Off] |
Indicates condition of turn signal function of combination switch. |
| TURN SIGNAL L [On/Off] |
| HAZARD SW [On/Off] |
Indicates condition of hazard switch. |
| RKE-LOCK [On/Off] |
Indicates condition of lock signal from Intelligent Key. |
| RKE-UNLOCK [On/Off] |
Indicates condition of unlock signal from Intelligent Key. |
| RKE-PANIC [On/Off] |
Indicates condition of panic alarm signal from Intelligent Key. |
ACTIVE TEST
| Test Item | Description |
| FLASHER |
This test is able to check turn signal lamp operation [Off/LH/RH]. |
WORK SUPPORT
| Support item | Setting | Description |
| 3-TIME FLASHER SETTING |
ON* |
3-Time flasher setting ON. |
| OFF |
3-Time flasher setting OFF. |
*: Initial setting
CONSULT Function (BCM - WIPER)
ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description
PUSH SW [On/Off]
Indicates condition of push-button ignition switch...
CONSULT Function (BCM - AIR CONDITIONER)
ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description
FAN ON SIG [On/Off]
Indicates condition of fan switch...
Other information:
System Description
SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNALIt transmits/receives each signal from the following AWD control unit via CAN communication line: Component parts Function
ABS actuator and electric unit (control unit)
Transmits the following signals via CAN communication to AWD control unit:
Nissan Murano Vehicle speed signal
Stop lamp switch signal (brake signal)
Yaw rate sensor signal
Side G sensor signal
Decel G sensor signal
ECM
Transmits the following signals via CAN communication to AWD control unit:
Accelerator pedal position signal
Engine speed signal
TCM
Transmits the following signals via CAN communication to AWD control unit:
Input shaft revolutional signal
CVT ratio signal
Combination meter
Transmits conditions of parking brake switch signal via CAN communication to AWD control unit...
Exploded View
1.
Emblem A
2.
Emblem B
3.
Emblem L (if equipped)
4.
Emblem C/D/E/F/G/H/J/K (if equipped)
Removal and Installation
REMOVALRemove the emblem from the panel heating with a heat gun.
CAUTION:
Do not damage the painted surface of the panel when removing the emblem...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more