Nissan Murano: Driver Assistance System :: Adas Control Unit / Dtc/circuit Diagnosis

Nissan Murano (Z52) 2015-2024 Service Manual / Cruise Control & Driver Assistance / Driver Assistance System :: Adas Control Unit / Dtc/circuit Diagnosis

Configuration (adas Control Unit)

Description Since vehicle specifications are not included in the ADAS control unit after replacement, it is required to write Nissan Murano vehicle specifications using CONSULT...

Icc/adas (adas Control Unit)

..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B2409 Half Latch Sw


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2409–71 HALF LATCH SW (Half latch switch) Diagnosis condition All times Signal (terminal) Half latch switch signal (automatic back door control module connector terminal: 7) Threshold When all of the following conditions are satisfied Back door: half latch or open Half latch switch: ON → OFF Diagnosis delay time – POSSIBLE CAUSE Entry of foreign materials to back door lock assembly Back door mechanism Half latch switch Harness or connectors (half latch switch circuit is open or shorted) Automatic back door control module FAIL-SAFEInhibit automatic back door system auto open/close function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Diagnosis and Repair Workflow


Work Flow OVERALL SEQUENCE *1: Include 1st trip DTC. *2: Include 1st trip freeze frame data. DETAILED FLOWGET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the “Diagnostic Work Sheet”...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

read more

 
Copyright © 2026 www.nimurano.com