Nissan Murano: Diagnosis System (bcm) / Comb Sw
ECU IDENTIFICATION
The BCM part number is displayed.
SELF DIAGNOSTIC RESULT
Refer to DTC Index.
DATA MONITOR
| Monitor Item [Unit] | Description |
|---|---|
| FR WIPER HI [On/Off] | Indicates condition of wiper operation of combination switch. |
| FR WIPER LOW [On/Off] | |
| FR WASHER SW [On/Off] | |
| FR WIPER INT [On/Off] | |
| INT VOLUME [1 - 7] | Indicates condition of intermittent wiper operation of combination switch. |
| RR WIPER ON [On/Off] | Indicates condition of rear wiper operation of combination switch. |
| RR WIPER INT [On/Off] | |
| RR WASHER SW [On/Off] | |
| TURN SIGNAL R [On/Off] | Indicates condition of right turn signal operation of combination switch. |
| TURN SIGNAL L [On/Off] | Indicates condition of left turn signal operation of combination switch. |
| TAIL LAMP SW [On/Off] | Indicates condition of tail lamp switch operation of combination switch. |
| HI BEAM SW [On/Off] | Indicates condition of high beam switch operation of combination switch. |
| HEAD LAMP SW 1 [On/Off] | Indicates condition of head lamp switch 1 operation of combination switch. |
| HEAD LAMP SW 2 [On/Off] | Indicates condition of head lamp switch 2 operation of combination switch. |
| PASSING SW [On/Off] | Indicates condition of passing switch operation of combination switch. |
| AUTO LIGHT SW [On/Off] | Indicates condition of auto light switch operation of combination switch. |
| FR FOG SW [On/Off] | Indicates condition of front fog lamp switch operation of combination switch. |
Intelligent Key
CONSULT Function (BCM - INTELLIGENT KEY)
ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Main Description
REQ SW -DR [On/Off]
×
Indicates condition of door request switch LH...
Bcm
CONSULT Function (BCM - BCM)
ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.WORK SUPPORT Support Item Setting Description
RESET SETTING VALUE
Reset
Returns BCM to initial value in factory shipment...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: U1000 Can Comm Circuit
DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real-time application. It is an on-Nissan Murano vehicle multiplex communication line with high data communication speed and excellent error detection ability...
Nissan Murano (Z52) 2015-2024 Service Manual: C1a18 Radar Aiming Incmp
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C1A18–54 LASER AIMING INCMP Diagnosis condition When Ignition switch is ON. Signal (terminal) — Threshold The radar of the distance sensor (ICC sensor) is not adjusted Diagnosis delay time — POSSIBLE CAUSE The adjustment of the radar is not yet performed Interruption in radar adjustment FAIL-SAFEThe following systems are canceled: Intelligent Cruise Control Automatic Emergency Braking (AEB) Intelligent Forward Collision Warning (I-FCW) DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Start the engine...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Checking engine oil level
- Settings
- Indicator lights
- New on site
- Most important about car
Autolight system
The autolight system allows the headlights to turn on and off automatically. The autolight system can:
Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.
Copyright © 2026 www.nimurano.com