Nissan Murano: Towing safety / Class I hitch
Class I trailer hitch equipment (receiver, ball
mount and hitch ball) can be used to tow
trailers of a maximum weight of 2,000 lbs.
(907 kg).
Tire pressures
- When towing a trailer, inflate the
vehicle tires to the recommended
cold tire pressure indicated
on the Tire and Loading Information
label.
- Trailer tire condition, size, load rating
and proper inflation pressure
should be in accordance with the
trailer and tire manufacturer’s
specifications.
Sudden maneuvers, wind gusts, and buffeting
caused by other vehicles can affect
trailer handling. Sway control devices may
be used to help control these affects...
Always use suitable safety chains between
your vehicle and the trailer. The safety
chains should be crossed and should be
attached to the hitch, not to the vehicle
bumper or axle...
Other information:
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
P1614
CHAIN OF IMMU-KEY
(Chain of immobilizer-key)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
—
Threshold
Inactive communication between NATS antenna amp...
DTC Description
DTC DETECTION LOGICAn excessively low voltage from the sensor is sent to ECM. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0452
EVAP SYS PRES SEN
(Evaporative emission system pressure sensor/switch low)
Diagnosis condition
—
Signal (terminal)
Voltage signal transmitted from EVAP control system pressure sensor to ECM
Threshold
An excessively low voltage from the sensor is sent to ECM
Diagnosis delay time
—
POSSIBLE CAUSE
Harness or connectors
(EVAP control system pressure sensor circuit is open or shorted...