Nissan Murano: Headlight control switch / Battery saver system
The battery saver system automatically turns off the following lights after a period of time when the ignition switch is placed in the OFF position and the doors are closed:
Headlights, when the headlight switch
is in the 
or
position
Interior lights, when left in the ON position
After the headlights automatically turn off
with the headlight switch in the 
or
position, the headlights will
illuminate
again if the headlight switch is moved
to the OFF position and then turned to
the 
or
position.
CAUTION
Even though the battery saver feature automatically turns off the headlights after a period of time, you should turn the headlight switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.
High Beam Assist (if so equipped)
The High Beam Assist system will operate
when the vehicle is driven at speeds of approximately
25mph(40 km/h) and above. If
an oncoming vehicle or leading vehicle appears
in front of your vehicle when the
headlight high beam is on, the headlight
will be switched to the low beamautomatically...
LED Daytime Running Lights (DRL) system
The LED portion of the headlights automatically
illuminate at 100% intensity when
the engine is started with the parking
brake released. The LED DRL operate with
the headlight switch in the OFF position or
in the position...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Av Control Unit
L..
Nissan Murano (Z52) 2015-2024 Service Manual: B2401 Ign Open
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2401–86 IGN OPEN (Ignition open) Diagnosis condition All times Signal (terminal) Ignition switch ON signal (CAN communication) Threshold When all of the following conditions are satisfied CAN communication is normal Automatic back door control module receives wake up signal via CAN communication with BCM Automatic back door control module cannot detect ignition switch ON signal via CAN communication with IPDM E/R Diagnosis delay time – B2401–87 IGN OPEN (Ignition open) Diagnosis condition All times Signal (terminal) CAN communication Threshold When automatic back door control module can not communicate CAN communication signal Diagnosis delay time 2 seconds POSSIBLE CAUSE CAN communication system BCM IPDM E/R Automatic back door control module FAIL-SAFEInhibit automatic back door system auto open/close function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Memory storage function (key-link)
- All-Wheel Drive (AWD) (if so equipped)
- Checking engine oil level
- New on site
- Most important about car
Vehicle security system
Your vehicle has two types of security systems:
Vehicle security system NISSAN Vehicle Immobilizer SystemThe vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
