Nissan Murano: Brake Control System :: Vdc/tcs/abs / Basic Inspection

Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit)

Values on the Diagnosis Tool CAUTION: The display shows the control unit calculation data, so a normal value might be displayed even in the event the output circuit (harness) is open or short-circuited...

Diagnosis and Repair Work Flow

Work Flow DETAILED FLOWINTERVIEW THE CUSTOMER Clarify customer concerns before inspection. First of all, perform an interview utilizing Diagnostic Work Sheet and reproduce the symptom as well as fully understand it...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Intelligent Key System Symptoms

Diagnosis Procedure NOTE: Perform the self diagnosis result with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected. SYMPTOM TABLE 1 (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) No. Door lock operation (remote keyless entry) Door lock operation (request switch) or back door open operation (opener switch of back door panel) Engine started with ignition switch operation (registered Intelligent Key is within the detection area of inside key antenna) Engine started with ignition switch operation (registered Intelligent Key placed next to ignition switch) Symptom 1 OK OK No start No start Diagnosis Procedure 2 OK NG OK OK Diagnosis Procedure 3 OK NG No crank, No start OK Diagnosis Procedure 4 NG NG No crank, No start OK Diagnosis Procedure 5 NG NG No start No start Diagnosis Procedure 6 OK OK No crank, No start OK Diagnosis Procedure 7 NG OK OK OK Diagnosis Procedure 8 NG NG OK OK Diagnosis Procedure 9 Poor range OK OK OK Diagnosis Procedure SYMPTOM TABLE 2 (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY) No...

Nissan Murano (Z52) 2015-2024 Service Manual: P0520 Eop Sensor

DTC Description DTC DETECTION LOGIC A voltage signal transmitted from the engine oil pressure sensor is lower than 0.26 V. A voltage signal transmitted from the engine oil pressure sensor is higher than 4.9 V. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0520 EOP SENSOR/SWITCH (Engine oil pressure sensor/switch circuit) 1 Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from engine oil pressure sensor to ECM Threshold A voltage signal transmitted from the engine oil pressure sensor is lower than 0...