Nissan Murano: Basic Inspection / Additional Service When Replacing Abs Actuator and Electric Unit (control Unit)

Diagnosis and Repair Work Flow

Work Flow DETAILED FLOWINTERVIEW THE CUSTOMER Clarify customer concerns before inspection. First of all, perform an interview utilizing Diagnostic Work Sheet and reproduce the symptom as well as fully understand it...

Adjustment of Steering Angle Sensor Neutral Position

Description Refer to the table below to determine if adjustment of steering angle sensor neutral position is required.×: Required –: Not required Situation Adjustment of steering angle sensor neutral position Removing/Installing ABS actuator and electric unit (control unit) — Replacing ABS actuator and electric unit (control unit) × Removing/Installing steering angle sensor × Replacing steering angle sensor × Removing/Installing steering components × Replacing steering components × Removing/Installing suspension components — Replacing suspension components × Changing tires to new ones × Tire rotation — Adjusting wheel alignment × Work Procedure ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITIONCAUTION: To adjust neutral position of steering angle sensor, make sure to use CONSULT...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Electrical Load Signal

Component Function Check CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION Turn ignition switch ON. Connect CONSULT and select “DATA MONITOR” mode. Select “LOAD SIGNAL” and check indication under the following conditions. Monitor item Condition Indication LOAD SIGNAL Rear window defogger switch ON ON OFF OFF Is the inspection result normal? YES>> GO TO 2...

Nissan Murano (Z52) 2015-2024 Service Manual: Excessive Operation Frequency

Diagnosis Procedure VDC function, TCS function, ABS function, EBD function, brake assist function or hill start assist function operates in excessive operation frequency.CHECK BRAKING FORCE Check brake force using a brake tester. Is the inspection result normal? YES>> GO TO 2...