Nissan Murano: Instrument Panel :: Unit Disassembly and Assembly / Center Console Assembly

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Instrument Panel :: Unit Disassembly and Assembly / Center Console Assembly

Exploded View

1.	Center console side finisher (RH)	2.	Center console side finisher (LH)	3.	Center console lower side finisher (LH)
4.	Center console reinforcement bracket	5.	Mood lamp [front console LH (if equipped)]	6.	Mood lamp lens [front console LH (if equipped)]
7.	Center console upper side finisher (LH)	8.	Center console lid	9.	Mood lamp lens [rear console (if equipped)]
10.	Rear center ventilator duct	11.	Rear heated seat switch [LH (if equipped)]	12.	Center console rear finisher
13.	Rear USB charge port	14.	Rear ventilator grille assembly	15.	Rear heated seat switch [RH (if equipped)]
16.	Center console tray	17.	Center console rear tray mat	18.	Mood lamp [rear console RH (if equipped)]
19.	Mood lamp [rear console LH (if equipped)]	20.	Center console assembly	21.	Center console front tray mat
22.	Shift selector finisher	23.	Push-button ignition switch	24.	Front heated seat switch [RH (if equipped)]
25.	Front heated seat switch [LH (if equipped)]	26.	Front auxiliary input jacks	27.	Front power socket
28.	Front climate controlled seat switch [RH (if equipped)]	29.	Front climate controlled seat switch [LH (if equipped)]	30.	Center console upper side finisher (RH)
31.	Center console lower side finisher (RH)	32.	Mood lamp [front console RH (if equipped)]	33.	Mood lamp lens [front console RH (if equipped)]
	Metal clip		Clip		Pawl

Disassembly and Assembly

DISASSEMBLY

Release clip and remove rear center ventilator duct from the center console assembly.

Release pawls and remove front power socket from the shift selector finisher.

If equipped with front heated seats, release pawls and remove heated seat switches (RH/LH) from shift selector finisher.

If equipped with front climate controlled seats, release pawls and remove front climate controlled seat switches (RH/LH) from shift selector finisher.

Release pawls and disconnect harness connector then remove rear USB charge port from the center console rear finisher.

Release pawls and disconnect harness connector then remove push-button ignition switch from the shift selector finisher.

Release screw and clips and remove center console tray from center console rear finisher.

Release screws and remove rear ventilator grille assembly from center console rear finisher.

Remove screw, release harness clip, then release pawls and remove mood lamp [front console RH/LH (if equipped)] from center console.

ASSEMBLY

Assembly is in the reverse order of disassembly.

Instrument Panel :: Unit Disassembly and Assembly

Glove Box Assembly and Housing

Disassembly and Assembly Remove glove box assembly and housing. Refer Removal and Installation. Remove pins (A) as shown. Release tensioner (A). Release pawls and remove glove box lid as shown...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0125 Ect Sensor

DTC Description DTC DETECTION LOGIC Voltage sent to ECM from the sensor is not practical, even when some time has passed after starting the engine. Engine coolant temperature is insufficient for closed loop fuel control. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0125 ECT SENSOR (Insufficient coolant temperature for closed loop fuel control) 1 Diagnosis condition — Signal (terminal) Voltage signal transmitted from engine coolant temperature sensor to ECM Threshold Voltage sent to ECM from the sensor is not practical, even when some time has passed after starting the engine Diagnosis delay time — 2 Diagnosis condition — Signal (terminal) Voltage signal transmitted from engine coolant temperature sensor to ECM Threshold Engine coolant temperature is insufficient for closed loop fuel control Diagnosis delay time — POSSIBLE CAUSE Harness and connectors (High resistance in the circuit) Engine coolant temperature sensor Thermostat FAIL-SAFENot applicable DTC Confirmation Procedure CHECK DTC PRIORITY If DTC P00125 is displayed with DTC P0116, P0117 or P0118, first perform the trouble diagnosis for DTC P0116, P0117 or P0118...

Nissan Murano (Z52) 2015-2024 Owners Manual: Turning the AEB system on/off