Nissan Murano: Automatic Drive Positioner :: Symptom Diagnosis / Adp System Symptoms

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Automatic Drive Positioner :: Symptom Diagnosis / Adp System Symptoms

Symptom Table

NOTE:

Always perform the “Basic Inspection” before performing diagnosis in the following table. Refer to Work Flow.

Symptom Diagnosis procedure Reference page
Manual functions (for specific part) do not operate. Sliding operation Check sliding switch. Component Function Check
Reclining operation Check reclining switch. Component Function Check
Lifting operation (front) Check lifting switch (front). Component Function Check
Lifting operation (rear) Check lifting switch (rear). Component Function Check
Tilt operation Check tilt switch. Component Function Check
Telescopic sensor Check telescopic switch. Component Function Check
Door mirror operation 1. Select switch Component Function Check
2. Mirror switch Component Function Check
All parts of seat Check power seat switch LH ground circuit. Component Function Check
Memory functions (for specific part) do not operate. Sliding operation Check sliding sensor. Component Function Check
Reclining operation Check reclining sensor. Component Function Check
Lifting operation (front) Check lifting sensor (front). Component Function Check
Lifting operation (rear) Check lifting sensor (rear). Component Function Check
Tilt operation Check tilt sensor. Component Function Check
Telescopic operation Check telescopic sensor. Component Function Check
Door mirror operation Check door mirror sensor.

LH: Component Function Check

RH:

Component Function Check
Memory functions and manual functions (for specific part) do not operate. Sliding operation Check sliding motor LH. Component Function Check
Reclining operation Check reclining motor LH. Component Function Check
Lifting operation (front) Check lifting motor LH (front). Component Function Check
Lifting operation (rear) Check lifting motor LH (rear). Component Function Check
Tilt operation Check tilt motor. Component Function Check
Telescopic operation Check telescopic motor. Component Function Check
Door mirror operation Check door mirror motor. Component Function Check
Entry/Exit assist function does not operate. 1. Check system setting. Work Procedure
2. Perform initialization. Work Procedure
3. Check front door switch LH. Component Function Check
Linking key fob to meter display. 1. Check door lock function. Component Function Check
2. Perform memory storing. Work Procedure

    Automatic Drive Positioner :: Symptom Diagnosis

    ..

    Normal Operating Condition

    Description The following symptoms are normal operations, and they do not indicate a malfunction. Symptom Cause Action to take Reference page Entry/exit assist function does not operate...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: System


    System Description SYSTEM DIAGRAMSonar Control Unit Input Signal (CAN Communication) Component parts Signal description ABS actuator and electric unit (control unit) Transmits the Nissan Murano vehicle speed signal to sonar control unit via CAN communication...

    Nissan Murano (Z52) 2015-2024 Owners Manual: Luggage hooks


    When securing items using luggage hooks located on the back of the seat or side finisher do not apply a load over more than 6.5 lbs. (29 N) to a single hook. The luggage hooks that are located on the floor should have loads less than 110 lbs. (490 N) to a single hook...

    Categories

    LATCH (Lower Anchors and Tethers for CHildren) system

    Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

    LATCH system lower anchor locations - bench seat

    Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

    read more

     
    Copyright © 2026 www.nimurano.com