Nissan Murano: Automatic Drive Positioner :: Symptom Diagnosis / Normal Operating Condition

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Automatic Drive Positioner :: Symptom Diagnosis / Normal Operating Condition

Description

The following symptoms are normal operations, and they do not indicate a malfunction.

Symptom	Cause	Action to take	Reference page
Entry/exit assist function does not operate.	No initialization has been performed.	Perform initialization.	Work Procedure
Entry/exit assist function does not operate.	Entry/exit assist function is disabled. NOTE: Entry/exit assist function is set to ON before delivery (initial setting).	Change the settings.	Work Procedure
Entry assist function does not operate.	Manual operation with power seat switch LH was performed after exit assist function execution.	Perform the entry assist function.	System Description
Memory function, entry/exit assist function or linking a key fob to meter display function does not operate.	The operating conditions are not fulfilled.	Fulfill the operation conditions.	Memory function: System Description
			Entry assist function: System Description
			Exit assist function: System Description
			Linking a key fob to meter display: System Description

Adp System Symptoms

Symptom Table NOTE: Always perform the “Basic Inspection” before performing diagnosis in the following table. Refer to Work Flow. Symptom Diagnosis procedure Reference page Manual functions (for specific part) do not operate...

Automatic Drive Positioner :: Removal and Installation

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Intelligent Key button operation light

The light blinks only when you push any button on the Intelligent Key. The light illumination only signifies that the key fob has transmitted a signal. You may look and/or listen to verify that the vehicle has performed the intended operation. The number of blinks identifies each registered key (i...

Nissan Murano (Z52) 2015-2024 Service Manual: Zero Point Reset

Description Zero point reset is an initializing procedure for the OCS (weight) sensors that must be performed using CONSULT when removing and installing passenger seat or servicing the OCS system, including removing or installing OCS control unit and sensors...