Other information:
Inspection
Check the brake pedal height with the floor trim removed.
Check the brake pedal height (H) between the dash lower panel (2) and the brake pedal upper surface.
Brake pedal height (H) from dash lower panel (2)
Refer to Brake Pedal.
Clearance (A) between brake pedal bracket (1), stop lamp switch (3) and brake pedal position switch (4) contact ends
Refer to Brake Pedal...
Diagnosis Procedure
CHECK MODE DOOR MOTOR POWER SUPPLY
Ignition switch ON.
Check voltage between mode door motor harness connector and ground.
+ −
Voltage
(Approx.)
Mode door motor
Connector Terminal
M154
1
Ground
Battery voltage
Is the inspection result normal?
YES>>
GO TO 2...