Nissan Murano: Basic Inspection / Additional Service When Replacing Audio Unit

Description

BEFORE REPLACEMENT

When replacing audio unit, save or print current vehicle specification with CONSULT configuration before replacement.

NOTE:

If “Before Replace ECU” cannot be used, use the “After Replace ECU” or “Manual Configuration” after replacing audio unit.

AFTER REPLACEMENT

CAUTION:

When replacing audio unit, you must perform “After Replace ECU” with CONSULT.

SAVE VIN DATA (AUDIO UNIT)

CONSULT work support

Perform “SAVE VIN DATA” to save current VIN data.

GO TO 2.

SAVE “OPERATION LOG”

CONSULT

Save Operation Log, according to the procedure of “Programming” in CONSULT Operation Manual.

NOTE:

Audio unit part number is saved in “Operating Log” saved in CONSULT.

GO TO 3.

REPLACE AUDIO UNIT

Replace audio unit. Refer to Removal and Installation.

GO TO 4.

CHECK “OPERATION LOG”

CONSULT

Check “Operation Log” saved before replacing the audio unit, according to the procedure of “Programming” in CONSULT Operation Manual.

NOTE:

For the Nissan Murano vehicle that the programming is to be performed, check if “Operation Log” of parts number is in Saved Data List.

Is there an applicable Operation Log in the Saved Data List?

GO TO 5.

GO TO 6.

PERFORM AUDIO UNIT PROGRAMMING

CONSULT

Perform audio unit programming, according to “Programming” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.

CAUTION:

During programming, maintain the following conditions:

GO TO 8.

READ IN AUDIO UNIT PART NUMBER BY “FAST LINKED”

Obtain audio unit part number by NISSAN PARTS CATALOGUE GLOBAL Web-FAST, according to the procedure of “FAST linked” in CONSULT Operation Manual. Refer to CONSULT Operation Manual.

CAUTION:

Be sure select “FAST linked”.

NOTE:

“FAST linked” allows an appropriate programming by obtaining ECU part number from NISSAN PARTS CATALOGUE GLOBAL Web-FAST even when the part number cannot be obtained from the old ECU used before replacing with a new one.

GO TO 7.

PERFORM PROGRAMMING (FAST LINKED)

CONSULT

Perform audio unit programming according to the procedure of FAST linked in CONSULT Operation Manual. Refer to CONSULT Operation Manual.

CAUTION:

During programming, maintain the following conditions:

GO TO 8.

CONFIGURATION (AUDIO UNIT)

CONSULT Configuration

Perform configuration. Refer to Work Procedure.

GO TO 9.

WRITE VIN DATA (AUDIO UNIT)

CONSULT work support

Perform “WRITE VIN (SAVED DATA)” or “WRITE VIN (MANUAL INPUT)” to write VIN data.

Work End.