Nissan Murano: Supplemental Restraint System (SRS) / Supplemental air bag warning labels

Nissan Murano (Z52) 2015-2024 Owners Manual / Safety—Seats, seat belts and supplemental restraint system / Supplemental Restraint System (SRS) / Supplemental air bag warning labels

Warning labels about the supplemental front-impact air bag system are placed in the vehicle as shown in the illustration.

Nissan Murano. Supplemental air bag warning labels

SRS Air bag warning labels
The warning labels are located on the surface of the sun visor.

WARNING

Do not use a rear-facing child restraint on a seat protected by an air bag in front of it. If the air bag deploys, it may cause serious injury or death.

Seat belt with pretensioner(s) (front and rear outboard seats)

WARNING The pretensioner(s) cannot be reused after activation. They must be replaced together with the retractor and buckle as a unit. If the vehicle becomes involved in a collision but pretensioner(s) are not activated, be sure to have the pretensioner system checked and, if necessary, replaced...

Supplemental air bag warning light

The supplemental air bag warning light, displaying in the instrument panel, monitors the circuits for the air bag systems, pretensioner(s) and all related wiring...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Turning the AEB with Pedestrian Detection system on/off

Perform the following steps to enable or disable the AEB with Pedestrian Detection system. Press the button until “Settings” displays in the vehicle information display and then press the OK button. Use the button to select “Driver Assistance...

Nissan Murano (Z52) 2015-2024 Service Manual: P0182 Ftt Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0182 FTT_SEN/CIRCUIT (Fuel temperature sensor “A” circuit low) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel tank temperature sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0183 FTT_SEN/CIRCUIT (Fuel temperature sensor “A” circuit high) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel tank temperature sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEP0182 Harness or connectors (The sensor circuit is open or shorted...