Nissan Murano: Brake Control System :: Automatic Emergency Braking / Dtc/circuit Diagnosis. Automatic Emergency Braking

Nissan Murano (Z52) 2015-2024 Service Manual / Brakes / Brake Control System :: Automatic Emergency Braking / Dtc/circuit Diagnosis. Automatic Emergency Braking

Diagnosis Procedure

AUTOMATIC EMERGENCY BRAKE DIAGNOSIS

The system will be cancelled automatically with a beep sound and AEB warning lamp on the combination meter will illuminate, when the system will not operate properly.
When the AEB warning lamp continues to illuminate even if the AEB system is turned on after the engine restarts, perform the trouble-diagnosis.

Go to ICC. Refer to Work Flow.

Action Test

Description Perform action test to verify the customer's concern. Perform action test and check the system operation after system diagnosis. Inspection Procedure CHECK AEB SYSTEM SETTING Start the engine...

Symptom Diagnosis

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Door Does Not Lock/unlock and Engine Does Not Start (req Sw/push Sw) (one Key)

Diagnosis Procedure Door does not lock/unlock with door request switch, and engine does not start when ignition switch is pressed while carrying Intelligent Key. (One Intelligent Key has the symptom, other keys operate normally.)SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY) Door lock operation (remote keyless entry) Door lock operation (request switch) or back door open operation (opener switch of back door panel) Engine started with push-button ignition switch operation (Intelligent Key is within the detection area of inside key antenna) Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch) OK NG No crank, No start OK DIAGNOSIS PROCEDURERefer to Diagnosis Procedure...

Nissan Murano (Z52) 2015-2024 Service Manual: Hood Hinge

Removal and Installation REMOVALRemove hood assembly. Refer to Removal and Installation. Remove front fender. Refer to Removal and Installation. Remove hood hinge bolts, and then remove hood hinge.INSTALLATIONInstallation is in the reverse order of removal...