Nissan Murano: Restraints / Seat Belt :: Preparation. Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
|
Tool number
(TechMate No.)
Tool name | | Description |
|
—
(J-46534)
Trim Tool Set |

|
Removing trim components |
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Inspection
AFTER A COLLISIONWARNING:
To avoid the risk of death or severe personal injury:
Inspect all seat belt system components including the seat belt webbing, retractors, pretensioners, buckles, anchors, and attaching hardware after any collision...
Other information:
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC detection condition
C1A40-23
SYSTEM SW CIRC
(Lane intervention switch circuit)
Diagnosis condition
When Ignition switch is ON.
Signal (terminal)
—
Threshold
Lane intervention switch circuit remains “ON” (short circuit) for 10 minutes or more
Diagnosis delay time
—
POSSIBLE CAUSE
Lane intervention switch circuit
Lane intervention switch
ADAS control unit
FAIL-SAFEThe following systems are canceled:
Lane Departure Warning (LDW)
Intelligent Lane Intervention (I-LI)
DTC Confirmation ProcedurePERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Start the engine and wait for approximately 10 minutes or more...
WARNING
Never allow anyone to ride in the
cargo area or on the rear seats when
they are in the fold-downposition. In a
collision, people riding in these areas
without proper restraints are more
likely to be seriously injured or killed.
Do not allow people to ride in any area
of your vehicle that is not equipped
with seats and seat belts...