Nissan Murano: Auto Operation Does Not Operate but Manual Operate Normally / Rear Lh
Diagnosis Procedure
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to Work Procedure .
Is the inspection result normal?
YES>>
Inspection End.
NO>>
GO TO 2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES>>
Check intermittent incident. Refer to Intermittent Incident.
NO>>
GO TO 1.
Diagnosis Procedure
PERFORM INITIALIZATION PROCEDURE
Initialization procedure is performed and operation is confirmed.
Refer to Work Procedure.
Is the inspection result normal?
YES>>
Inspection End...
Diagnosis Procedure
CHECK POWER WINDOW AUTO OPERATION
Check AUTO operation of the door when anti-pinch function does not operate.
Is the inspection result normal?
YES>>
GO TO 2...
Other information:
System Description
SYSTEM DIAGRAMSignal transmission function list Component Signal
Combination meter
Charge warning lamp signal
System DescriptionThe generator provides DC voltage to operate the vehicle's electrical system and to keep the battery charged...
DTC Description
DESCRIPTIONWhen the selector lever position is P or N, park/neutral position (PNP) signal from the transmission range switch is sent to ECM.DTC DETECTION LOGICThe signal of the park/neutral position (PNP) signal does not change during driving after the engine is started...