Nissan Murano: Electrical & Power Control / Power Supply, Ground & Circuit Elements :: Wiring Diagram
Circuit Breaker (Built Into BCM)
For example, when current is 30A, the circuit is broken within 8 to 20 seconds.This circuit breaker is used for the following systems:
Power windows
Power moonroof
Power seat
Power lumbar
Power sunshade
Circuit Breaker (External to BCM)
The PTC thermistor generates heat in response to current flow...
Harness Layout
OUTLINERefer to Harness Layout.BODY HARNESSRefer to Harness Layout.BODY NO. 2 HARNESSRefer to Harness Layout.FRONT SEAT LH HARNESSRefer to Harness Layout...
Other information:
Description
Transmits switch operation signal to moonroof motor assembly.
Diagnosis Procedure
CHECK MOONROOF SWITCH INPUT SIGNAL
Ignition switch ON.
Check voltage between moonroof motor assembly harness connector and ground.
(+) (–) Condition
Voltage
(Approx...
Component Function Check
CHECK FUNCTION
CONSULT
Select “HOOD SW” and “HOOD SW 2” in “Data Monitor” mode of “IPDM E/R”.
Check “HOOD SW” and “HOOD SW 2” indication under the following condition:
Monitor item Condition Indication
HOOD SW
Hood
Open
OFF
Close
ON
HOOD SW 2
Open
ON
Close
OFF
Is the indication normal?
YES>>
Hood switch is OK...
Categories

The autolight system allows the headlights
to turn on and off automatically. The autolight
system can:
Turn on the headlights, front parking,
tail, license plate and instrument panel
lights automatically when it is dark.
Turn off all the lights (except daylight
running lights) when it is light.
Keep all the lights on for a period of time
after you place the ignition switch in the
OFF position and all doors are closed.
read more