Nissan Murano: Power Supply, Ground & Circuit Elements :: Wiring Diagram / Harness
Harness Layout
OUTLINE
Refer to Harness Layout.
BODY HARNESS
Refer to Harness Layout.
BODY NO. 2 HARNESS
Refer to Harness Layout.
FRONT SEAT LH HARNESS
Refer to Harness Layout.
FRONT SEAT RH HARNESS
Refer to Harness Layout.
MOTION ACTIVATED BACK DOOR SUB-HARNESS
Refer to Harness Layout.
CHASSIS HARNESS
Refer to Harness Layout.
BACK DOOR HARNESS
Refer to Harness Layout.
FRONT DOOR LH HARNESS
Refer to Harness Layout.
FRONT DOOR RH HARNESS
Refer to Harness Layout.
REAR DOOR LH HARNESS
Refer to Harness Layout.
REAR DOOR RH HARNESS
Refer to Harness Layout.
ENGINE ROOM HARNESS
Refer to Harness Layout.
FRONT END MODULE HARNESS
Refer to Harness Layout.
BATTERY CABLE
Refer to Harness Layout.
ENGINE CONTROL HARNESS
Refer to Harness Layout.
ENGINE CONTROL SUB-HARNESS
Refer to Harness Layout.
MAIN HARNESS
Refer to Harness Layout.
CONSOLE SUB-HARNESS
Refer to Harness Layout.
HVAC SUB-HARNESS VIEW
Refer to Harness Layout.
ROOM LAMP HARNESS
Refer to Harness Layout.
Wiring Diagram
BATTERY POWER SUPPLYRefer to Wiring Diagram.BATTERY POWER SUPPLY FUSE No. 9Refer to Wiring Diagram.BATTERY POWER SUPPLY FUSE No. 10Refer to Wiring Diagram...
Other information:
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen items
(Trouble diagnosis content) DTC detection condition
C1A34–64
COMMAND ERROR
(Command error)
Diagnosis condition
When MAIN switch of ICC system is ON
When driving the Nissan Murano vehicle
Signal (terminal)
CAN communication signal
Threshold
If an error occurs in the command signal that ADAS control unit transmits to ECM via CAN communication
Diagnosis delay time
1 second or less
POSSIBLE CAUSEADAS control unitFAIL-SAFEThe following systems are canceled:
Vehicle-to-vehicle distance control mode
Conventional (fixed speed) cruise control mode
Automatic Emergency Braking (AEB)
Automatic Emergency Braking (AEB) with pedestrian detection
Intelligent Forward Collision Warning (I-FCW)
Confirmation Procedure
CHECK DTC PRIORITY
If DTC “C1A34–64” is displayed with DTC “U1000–01”, first diagnose the DTC “U1000–01”...
System Description
OUTLINEAutomatic A/CThe ventilation system is controlled by the A/C switch assembly. For details on the automatic air conditioner system, refer to System Description.AIR FLOW Front Rear Discharge air flow
Mode position
Condition
Air outlet / distribution
DEF
(1)
VENT
FOOT
Side (2)
Center (3)
Front (4)
Center (5)
Upper Vent: ON
Temperature control switch
18°C (60°F)
—
×
×
—
—
Other than 18°C (60°F)*1
—
×
×
—
—
—
—
×
×
×
×
—
—
—
×
×
×
—
×
—
×
×
×
—
×
—
×
—
—
*1: Air flow is also supplied to front foot until passenger room temperature stabilizes when temperature setting is other than 18°C (60°F)...