Nissan Murano: Power Supply, Ground & Circuit Elements :: Wiring Diagram / Ground

Nissan Murano (Z52) 2015-2024 Service Manual / Electrical & Power Control / Power Supply, Ground & Circuit Elements :: Wiring Diagram / Ground

Ground Distribution

BACK DOOR HARNESS

Refer to Wiring Diagram.

BODY HARNESS

Refer to Wiring Diagram.

BODY NO. 2 HARNESS

Refer to Wiring Diagram.

ENGINE ROOM HARNESS

Refer to Wiring Diagram.

FRONT END MODULE HARNESS

Refer to Wiring Diagram.

ENGINE CONTROL HARNESS

Refer to Wiring Diagram.

MAIN HARNESS

Refer to Wiring Diagram.

BATTERY CABLE

Refer to Wiring Diagram.

    Power Supply Routing Circuit

    Wiring Diagram BATTERY POWER SUPPLYRefer to Wiring Diagram.BATTERY POWER SUPPLY FUSE No. 9Refer to Wiring Diagram.BATTERY POWER SUPPLY FUSE No. 10Refer to Wiring Diagram...

    Power Supply, Ground & Circuit Elements :: Basic Inspection

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: Wheel balance


    Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be performed with the wheels off the vehicle. Spin balancing the wheels on the vehicle could lead to mechanical damage...

    Nissan Murano (Z52) 2015-2024 Service Manual: P0122 Tp Sensor


    DTC Description DTC DETECTION LOGIC An excessively low voltage from the TP sensor 2 is sent to ECM. An excessively high voltage from the TP sensor 2 is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0122 TP SEN 2/CIRC-B1 (Throttle/Pedal position sensor/switch “A” circuit low) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from TP sensor 2 to ECM Threshold An excessively low voltage from the TP sensor 2 is sent to ECM Diagnosis delay time — P0123 TP SEN 2/CIRC-B1 (Throttle/Pedal position sensor/switch “A” circuit high) Diagnosis condition Start engine and let it idle Signal (terminal) Voltage signal transmitted from TP sensor 2 to ECM Threshold An excessively high voltage from the TP sensor 2 is sent to ECM Diagnosis delay time — POSSIBLE CAUSEP0122 Harness or connectors (TP sensor 2 circuit is open or shorted...

    Categories

    Fuel gauge

    Nissan Murano. Fuel gauge

    The gauge indicates the approximate fuel level in the tank.

    The gauge may move slightly during braking, turning, acceleration, or going up or down hills.

    The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.

    read more

     
    Copyright © 2026 www.nimurano.com