Nissan Murano: Electrical & Power Control / Power Control System :: Power Distribution System

Removal and Installation. Ipdm E/r (intelligent Power Distribution Module Engine Room)

Exploded View 1. IPDM E/R 2. IPDM E/R Case Removal and Installation CAUTION: IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit...

Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Three-way catalyst

The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants. WARNING The exhaust gas and the exhaust system are very hot...

Nissan Murano (Z52) 2015-2024 Service Manual: Motion Activated Back Door Control Unit

Reference Value TERMINAL LAYOUTPHYSICAL VALUES Terminal No. (Wire color) Description Condition Voltage (Approx.) (+) (–) Signal name Input/Output 1 (L) Ground Serial communication Input/Output — — 2 (V) Ground Power supply (BAT) Input — Battery voltage 3 (B) Ground Ground — — 0 V 4 (W) Ground Motion activated back door sensor (upper) input signal Input — — 5 (W) Ground Motion activated back door sensor (upper) output signal Input — — 6 (W) Ground Motion activated back door sensor (lower) input signal Input — — 7 (W) Ground Motion activated back door sensor (lower) output signal Input — — NOTE: Voltage generated in communication circuit between motion activated back door sensor and motion activated back door control unit is extremely low and therefore cannot be measured...