Other information:
Diagnosis Procedure
NOTE:
Do not disconnect the battery negative terminal and the driver seat control unit connector until DTC is confirmed with CONSULT.
CHECK FUSE
Check that the following fusible link is not blown:
Signal name Fusible link No. Capacity
Battery power supply
L
40 A
Is the inspection result normal?
YES>>
GO TO 2...
Diagnosis Procedure
The MAIN switch can be turned ON/OFF, but the ICC system cannot be set even if the SET/COAST switch is pressed.NOTE:
The system cannot be set in the following cases:
When the Nissan Murano vehicle ahead is not detected below the speed of 32 km/h (20 MPH)...