Nissan Murano: Roof :: Ecu Diagnosis Information / Moonroof Motor Assembly
Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Roof :: Ecu Diagnosis Information / Moonroof Motor Assembly
TERMINAL LAYOUT
PHYSICAL VALUES
|
Terminal No. (Wire color) | Description | Condition |
Voltage (Approx.) | ||
|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||
|
1 (R) |
Ground | Battery power supply | Input | — | Battery voltage |
|
2 (GR) |
Ground | Sunshade switch close signal | Input |
Sunshade switch in following position: CLOSE |
0 V |
|
3 (Y) |
Ground | Sunshade switch open signal | Input |
Sunshade switch in following position: OPEN |
0 V |
|
4 (O) |
Ground | Nissan Murano Vehicle speed signal (2-pulse) | Input | Speedometer operated [When vehicle speed is approx. 25 MPH (40 km/h)] |
|
|
5 (B) |
Ground | Ground | — | — | 0 V |
|
6 (P) |
Ground | Ignition power supply | Input | Supplies power to moonroof motor assembly when ignition switch is ON. | Battery voltage |
|
7 (BR/B) |
Ground | Moonroof switch open signal | Input |
Moonroof switch in following position: OPEN |
0 V |
|
8 (SB) |
Ground | Moonroof switch close signal | Input |
Moonroof switch in following position: CLOSE |
0 V |
|
9 (W) |
Ground | LIN communication | Input/Output | Provides communication link between sunshade motor assembly and moonroof motor assembly. | 0 V |
Sunshade Motor Assembly
Reference Value
TERMINAL LAYOUTPHYSICAL VALUES
Terminal No.
(Wire color) Description Condition
Voltage
(Approx.)
+ - Signal name Input/Output
1
(R)
Ground
Battery
Input
Supplies power to sunshade motor...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Climate Controlled Seat System
Symptom Table Symptom Inspection item Climate controlled seat inoperative. Power supply and ground circuit. Refer to Diagnosis Procedure. Seat back blower inoperative. Seat back blower. Refer to Component Function Check. Seat cushion blower inoperative...
Nissan Murano (Z52) 2015-2024 Service Manual: Seat Belt Warning System
Seat Belt Warning System Does Not Function SEAT BELT WARNING LIGHT Ignition switch ON. Does the seat belt warning lamp come ON? YES>> GO TO 2. NO>> Check 5A fuse [No. 31, located in the fuse block (J/B)]. Check front seat belt buckle switch LH...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- High Beam Assist (if so equipped)
- Warning lights
- Vehicle Dynamic Control (VDC) OFF switch
- New on site
- Most important about car
Autolight system
The autolight system allows the headlights to turn on and off automatically. The autolight system can:
Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.
Copyright © 2026 www.nimurano.com