Other information:
Precautions for Trouble Diagnosis
CAUTION:
Follow the instructions listed below. Failure to do this may cause damage to parts:
Never apply 7.0 V or more to the measurement terminal.
Use a tester with open terminal voltage of 7.0 V or less.
Turn the ignition switch OFF and disconnect the battery cable from the negative terminal when checking the harness...
DTC Description
DTC DETECTION LOGICNOTE:
If DTC B2557 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description.
If DTC B2557 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010...