Nissan Murano: Roof :: Ecu Diagnosis Information / Bcm (body Control Module)

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Roof :: Ecu Diagnosis Information / Bcm (body Control Module)

List of ECU Reference

ECU Reference
BCM Values on the Diagnosis Tool
Reference Value
Fail Safe
DTC Inspection Priority Chart
DTC Index

    Roof :: Ecu Diagnosis Information

    ..

    Moonroof Motor Assembly

    Reference Value TERMINAL LAYOUTPHYSICAL VALUES Terminal No. (Wire color) Description Condition Voltage (Approx.) + - Signal name Input/Output 1 (R) Ground Battery power supply Input — Battery voltage 2 (GR) Ground Sunshade switch close signal Input Sunshade switch in following position: CLOSE 0 V 3 (Y) Ground Sunshade switch open signal Input Sunshade switch in following position: OPEN 0 V 4 (O) Ground Nissan Murano Vehicle speed signal (2-pulse) Input Speedometer operated [When vehicle speed is approx...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: C1a21 Unit High Temp


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C1A21–48 UNIT HIGH TEMP (Unit high temperature) Diagnosis condition When Ignition switch is ON. Signal (terminal) — Threshold Temperature around distance sensor (ICC sensor) is high...

    Nissan Murano (Z52) 2015-2024 Service Manual: Steering System :: Periodic Maintenance. Power Steering Fluid


    Draining and Refilling DRAININGDisconnect the hydraulic lines from the steering gear. Refer to Exploded View. Drain power steering fluid into a suitable container.REFILLINGConnect the hydraulic lines to the steering gear. Refer to Exploded View. Fill power steering reservoir while checking power steering fluid level...

    Categories

    LATCH (Lower Anchors and Tethers for CHildren) system

    Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

    LATCH system lower anchor locations - bench seat

    Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

    read more

     
    Copyright © 2026 www.nimurano.com