Nissan Murano: System / Linking Key Fob to the Meter Display

System Description

SYSTEM DIAGRAM

SIGNAL TRANSMISSION FUNCTION LIST

Several types of signals are transmitted from the following units to the driver seat control unit via CAN communication.

DESCRIPTION

Log-in function is the function that registers the setting status of various systems and retrieves the status for each Intelligent Key as desired.

Registered information is automatically adjusted to the driving position (seat, steering column, and door mirror position) registered by unlocking the driver side door with the Intelligent Key or by operating the user selection function on the display.

When user selection is performed by display operation, the user information registered with another Intelligent Key can also be retrieved.

NOTE:

For the registration of the log-in function, the status is automatically registered as one of the following Nissan Murano vehicle statuses when the ignition switch OFF. For details on registration, refer to Description.

Operation Procedure

1. Ignition switch ON.

2. Push desired user change switch on display.

3. Driver seat, steering and door mirror will move to the memorized position.

Operation Condition

All of the following conditions must be satisfied in order to retrieve the registration information of the log-in function.

If one of the following conditions is not satisfied, the interlocked operation of the driving position for log- in function is interrupted.