Nissan Murano: Electrical & Power Control / Lan System :: Can

Basic Inspection. Diagnosis and Repair Workflow

Trouble Diagnosis Flow Chart DESCRIPTIONDETAIL OF TROUBLE DIAGNOSIS FLOW CHARTINTERVIEW WITH CUSTOMER Interview with the customer is important to detect the root cause of CAN communication system errors and to understand Nissan Murano vehicle condition and symptoms for proper trouble diagnosis...

How to Use This Manual. How to Use This Section

Information “CAN” of LAN Section describes information peculiar to a vehicle and inspection procedures. For trouble diagnosis procedure, refer to Trouble Diagnosis Flow Chart of “CAN FUNDAMENTAL”...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Vehicle-to-vehicle distance control mode switches

The system is operated by the CRUISE ON/OFF switch and four control switches, all mounted on the steering wheel. CANCEL switch:Deactivates the system without erasing the set speed. RES/+ switch:Resumes set speed or increases speed incrementally...

Nissan Murano (Z52) 2015-2024 Service Manual: P0462 Fuel Level Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0462 FUEL LEVL SEN/CIRC (Fuel level sensor “A” circuit low) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel level sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0463 FUEL LEVL SEN/CIRC (Fuel level sensor “A” circuit high) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel level sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P0462 Harness or connectors (The CAN communication line is open or shorted) Harness or connectors (The sensor circuit is open or shorted) Combination meter Fuel level sensor DTC P0463 Harness or connectors (The CAN communication line is open or shorted) Harness or connectors (The sensor circuit is open or shorted) Combination meter Fuel level sensor FAIL-SAFENot applicable DTC Confirmation Procedure CHECK DTC PRIORITY If DTC P0462 or P0463 is displayed with DTC UXXXX or P0607, first perform the confirmation procedure for DTC UXXXX or P0607...