Nissan Murano: Dtc/circuit Diagnosis / Instrument Panel Tweeter

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Audio, Visual & Navigation System :: Navigation with Bose / Dtc/circuit Diagnosis / Instrument Panel Tweeter

Diagnosis Procedure

CONNECTOR CHECK

Check the AV control unit, Bose speaker amp. and speaker connectors for the following:

  • Proper connection

  • Damage

  • Disconnected or loose terminals

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair the terminals or connectors.

CHECK INSTRUMENT PANEL TWEETER SIGNAL CIRCUIT CONTINUITY (BOSE SPEAKER AMP.)

  1. Ignition switch OFF.

  2. Disconnect Bose speaker amp. connector and suspect instrument panel tweeter connector.

  3. Check continuity between Bose speaker amp. connector and suspect instrument panel tweeter connector.

    Bose speaker amp. Instrument panel tweeter Continuity
    Connector Terminal Connector Terminal
    B120 1 M62 (LH) 1 Yes
    2 2
    4 M73 (RH) 1
    3 2

  4. Check continuity between Bose speaker amp. connector and ground.

    Bose speaker amp. Ground Continuity
    Connector Terminal
    B120 1 — No
    2
    4
    3

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness or connectors.

CHECK INSTRUMENT PANEL TWEETER SIGNAL (BOSE SPEAKER AMP.)

  1. Connect Bose speaker amp. connector and suspect instrument panel tweeter connector.

  2. Ignition switch ON.

  3. Push AV control unit POWER switch.

  4. Check signal between the terminals of Bose speaker amp. connector.

    Bose speaker amp. connector B120 Condition Reference value
    (+) (−)
    Terminal Terminal
    1 2 Audio signal output

    4 3

Is the inspection result normal?

YES>>

Replace instrument panel tweeter. Refer to Removal and Installation.

NO>>

GO TO 4.

CHECK INSTRUMENT PANEL TWEETER SIGNAL CIRCUIT CONTINUITY (AV CONTROL UNIT)

  1. Ignition switch OFF.

  2. Disconnect Bose speaker amp. connector and AV control unit connector.

  3. Check continuity between Bose speaker amp. connector and AV control unit connector.

    Bose speaker amp. AV control unit Continuity
    Connector Terminal Connector Terminal
    B121 35 M161 2 Yes
    36 3
    33 11
    34 12

  4. Check continuity between Bose speaker amp. connector and ground.

    Bose speaker amp. Ground Continuity
    Connector Terminal
    B121 35 — No
    36
    33
    34

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace harness or connectors.

CHECK INSTRUMENT PANEL TWEETER SIGNAL (AV CONTROL UNIT)

  1. Connect Bose speaker amp. connector and AV control unit connector.

  2. Ignition switch ON.

  3. Push AV control unit POWER switch.

  4. Check signal between AV control unit connector and ground.

    AV control unit Condition Reference value
    Connector (+) (−)
    Terminal Terminal
    M161 2 3 Audio signal output

    11 12

Is the inspection result normal?

YES>>

Replace Bose speaker amp. Refer to Removal and Installation.

NO>>

Replace AV control unit. Refer to Removal and Installation.

    Bose Speaker Amp

    Diagnosis Procedure CHECK FUSE Check that the following fuses are not blown: Terminal No. Signal name Fuse No. Capacity 10 Battery power supply 11 15 A 11 Battery power supply 12 15 A Are the fuses blown? YES>> Replace the blown fuse after repairing the affected circuit...

    Amp on Signal Circuit

    Diagnosis Procedure CHECK CONTINUITY BETWEEN AV CONTROL UNIT AND BOSE SPEAKER AMP. Ignition switch OFF. Disconnect AV control unit connector and Bose speaker amp...

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: System maintenance


    CAUTION Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. Do not damage the camera as the monitor screen may be adversely affected. If dirt, rain or snow accumulates on any of the cameras м, the MOD system may not operate properly...

    Nissan Murano (Z52) 2015-2024 Service Manual: Hood Stay


    Removal and Installation REMOVALSupport hood assembly using a suitable tool. WARNING: Bodily injury may occur if hood assembly is not supported properly when removing hood stay. Remove metal clip (3) located on connection between hood stay (1) and stud ball (2) (hood side) by using a suitable tool (A) to release clip to side and then toward front...

    Categories

    Unfastening the seat belts. Checking seat belt operation

    Unfastening the seat belts

    Nissan Murano. Unfastening the seat belts. Checking seat belt operation

    To unfasten the seat belt, press the button on the buckle Nissan Murano. Unfastening the seat belts. Checking seat belt operation. The seat belt automatically retracts.

    read more

     
    Copyright © 2026 www.nimurano.com