Nissan Murano: Srs Air Bag Control System :: Basic Inspection / Inspection and Adjustment

Nissan Murano (Z52) 2015-2024 Service Manual / Restraints / Srs Air Bag Control System :: Basic Inspection / Inspection and Adjustment

Diagnosis and Repair Work Flow

Work Flow OVERALL SEQUENCEDETAILED FLOWINTERVIEW THE CUSTOMER FOR THE SYMPTOM Interview the customer for the symptom (the condition and the environment when the incident/malfunction occurs)...

Additional Service When Replacing Control Unit

Description AIR BAG DIAGNOSIS SENSOR UNITVehicle specifications are not yet written in a new air bag diagnosis sensor unit. It is therefore necessary to write the specifications to the new unit and then perform “Re/programming, Configuration” with CONSULT...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B2556 Push-Btn Ign Sw


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition B2556 PUSH-BTN IGN SW (Push-button ignition switch) Diagnosis condition When ignition switch ON. Signal (terminal) — Threshold BCM detects the ignition switch stuck at ON for 100 seconds or more Diagnosis delay time — POSSIBLE CAUSE Push-button ignition switch BCM Harness or connector (Ignition switch circuit is shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: Diagnosis System (adas Control Unit 2)


CONSULT Function (ICC/ADAS) APPLICATION ITEMSCONSULT performs the following functions via CAN communication using ADAS control unit. Diagnosis mode Description Configuration The Nissan Murano vehicle specification that is written in ADAS control unit can be displayed or stored The Nissan Murano vehicle specification can be written when ADAS control unit is replaced Work support Displays causes of automatic system cancellation occurred during system control Self Diagnostic Result Displays the name of a malfunctioning system stored in the ADAS control unit Data Monitor Displays ADAS control unit input/output data in real time Active Test Enables an operational check of a load by transmitting a driving signal from the ADAS control unit to the load ECU Identification Displays ADAS control unit part number CAN Diag Support Monitor Displays a reception/transmission state of CAN communication and ITS communication CONFIGURATIONConfiguration includes functions as follows...

Categories

Luggage hooks

Nissan Murano. Luggage hooks

When securing items using luggage hooks located on the back of the seat or side finisher do not apply a load over more than 6.5 lbs. (29 N) to a single hook.

The luggage hooks that are located on the floor should have loads less than 110 lbs. (490 N) to a single hook.

read more

 
Copyright © 2026 www.nimurano.com