Nissan Murano: RearView Monitor (if so equipped) / How to turn on and off predicted course lines
To toggle on and off the predicted course
lines while in the P (Park) position:
- Press the CAMERA button.
- Touch the “Predicted Course Lines” key
to turn the feature on or off.
To toggle on and off the predicted course
lines while in the R (Reverse) position, press
the CAMERA button.
Press the CAMERA button.
Touch the “Display Settings” key.
Touch the “Brightness,” “Contrast,” “Tint,”
“Color,” or “Black Level” key...
WARNING
Listed below are the system limitations
for RearView Monitor. Failure to operate
the vehicle in accordance with these
system limitations could result in serious
injury or death...
Other information:
DTC Description
DTC DETECTION LOGIC
An excessively low voltage from the APP sensor 1 is sent to ECM.
An excessively high voltage from the APP sensor 1 is sent to ECM.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P2122
APP SEN 1/CIRC
(Throttle/Pedal position sensor/switch “D” circuit low)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
Voltage signal transmitted from APP sensor 1 to ECM
Threshold
An excessively low voltage is sent to ECM
Diagnosis delay time
—
P2123
APP SEN 1/CIRC
(Throttle/Pedal position sensor/switch “D” circuit high)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
Voltage signal transmitted from APP sensor 1 to ECM
Threshold
An excessively high voltage is sent to ECM
Diagnosis delay time
—
POSSIBLE CAUSEDTC P2122
Harness or connectors
(APP sensor 1 circuit is open or shorted...
Aiming Adjustment
PREPARATION BEFORE ADJUSTINGThe fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb. Before performing aiming adjustment procedure, check the following:
Ensure all tires are inflated to correct pressure.
Place vehicle and screen on level surface...