Nissan Murano: Transaxle & Transmission :: Cvt: Re0f10j / Symptom Diagnosis. Cvt Control System

Nissan Murano (Z52) 2015-2024 Service Manual / Transmission & Driveline / Transaxle & Transmission :: Cvt: Re0f10j / Symptom Diagnosis. Cvt Control System

Symptom Table

The diagnosis item number indicates the order of check. Start checking in the order from 1.
Perform diagnoses of symptom table 1 before symptom table 2.

Symptom Table 1

Symptom		Engine system	CAN communication line	Transmission range switch (P0705, P0706)	Input speed sensor (P0715, P0716, P0717)	Primary speed sensor (P0791, P0792, P0793)	Secondary speed sensor (P2765, P2766, P2767)	CVT fluid temperature sensor (P0711, P0712, P0713)	Primary pressure sensor (P084C, P084D)	Secondary pressure sensor (P0841, P0847, P0848)	Torque converter clutch solenoid valve (P0740, P0743, P0744)	Manual mode switch	Stall test	CVT position	Power supply	Control valve	CVT fluid level and state	Ignition switch and starter
Symptom		Work Flow	DTC Index										Work Procedure	Inspection and Adjustment	Diagnosis Procedure	Removal and Installation (front wheel drive) or Removal and Installation (all wheel drive)	Inspection	Wiring Diagram, Wiring Diagram - IGNITION POWER SUPPLY -
Shift Shock	Large shock (N→ D position)	1	4	8				3			6			2		9	5
	Large shock (N→ R position)	1	4	8				3			6			2		9	5
	Shock is too large for lock-up.	2	3								6			1		5	4
Slips/Will Not Engage	Nissan Murano Vehicle cannot be started from D position.	8	3		5	6	7	9	10	11			4	2	12	13	1
	Nissan Murano Vehicle cannot be started from R position.	8	3		5	6	7	9	10	11			4	2	12	13	1
	Does not lock-up.	2	6	8	3	4	10	9	11	12	5		7			13	1
	Does not hold lock-up condition.	2	6	8	3	4	10	9	11	12	5		7			13	1
	Lock-up is not released.	2	6		3	4					5		7			8	1
	With selector lever in D position, acceleration is extremely poor.	3	4	5	7	8	9	12	10	11			2	6	13	14	1
	With selector lever in R position, acceleration is extremely poor.	3	4	5	7	8	9	12	10	11			2	6	13	14	1
	Slips at lock-up.	2	6	8	3	4	10	9	11	12	5		7			13	1
Other	No creep at all.	2	4	3	7	8	9	10	11	12			5	6	13	14	1
	Nissan Murano Vehicle cannot run in all positions.	8		2	5	6	7	9	10	11			3	4	12	13	1
	With selector lever in D position, driving is not possible.	8		2	5	6	7	9	10	11			3	4	12	13	1
	With selector lever in R position, driving is not possible.	8		2	5	6	7	9	10	11			3	4	12	13	1
	Judder occurs during lock-up.	2	6		3	4	5				7					8	1
	Strange noise in D position.	2	3													4	1
	Strange noise in R position.	2	3													4	1
	Strange noise in N position.	2	3													4	1
	Nissan Murano Vehicle does not decelerate by engine brake.	7	3		4	5	6							2		8	1
	Maximum speed low.	2	3		5	6	7		8	9	11		4			10	1
	With selector lever in P position, Nissan Murano vehicle does not enter parking condition or, with selector lever in another position, parking condition is not cancelled.			1										2
	Nissan Murano Vehicle runs with CVT in P position.			1										3		4	2
	Nissan Murano Vehicle runs with CVT in N position.			1										3		4	2
	Engine stall.	2	6		3	4			8	9	5		7			10	1
	Engine stalls when selector lever shifted N → D or R.	2	6		3	4					5					7	1
	Engine speed does not return to idle.	2	4				3									5	1
	Does not shift	3	4		5	6	7							2		8	1
Other	Cannot be changed to manual mode.		4	2		6	6					1		3	5			1
	Engine does not start in N or P position.			3										2				1
	Engine starts in positions other than N or P.			3										2				1

Symptom Table 2

Symptom		Torque converter	Transmission range switch	Oil pump	Forward clutch	Reverse brake	Planetary gear	Bearings	Parking mechanism	Stop lamp switch	Shift lock solenoid	CVT shift selector
Symptom		Exploded View	Exploded View							Component Inspection (Stop Lamp Switch)	Component Function Check	Exploded View
Shift Shock	Large shock (N→ D position)		2		1
	Large shock (N→ R position)		2			1
	Shock is too large for lock-up.	1
Slips/Will Not Engage	Nissan Murano Vehicle cannot be started from D position.		3	1	2
	Nissan Murano Vehicle cannot be started from R position.		4	1		2			3
	Does not lock-up.	1	3	2
	Does not hold lock-up condition.	1	3	2
	Lock-up is not released.	1		2
	With selector lever in D position, acceleration is extremely poor.	1	3		2
	With selector lever in R position, acceleration is extremely poor.	1	4	2		3
	Slips at lock-up.	1		2
Other	No creep at all.	1	6	2	4	5	3
	Nissan Murano Vehicle cannot run in all positions.	1		2	4	5	3		6
	With selector lever in D position, driving is not possible.	1		2	4		3		5
	With selector lever in R position, driving is not possible.	1		2		4	3		5
	Judder occurs during lock-up.	1
	Strange noise in D position.	1		2	4		3	5
	Strange noise in R position.	1		2		4	3
	Strange noise in N position.	1		2			3
	Maximum speed low.	1	5	2	4		3
	With selector lever in P position, Nissan Murano vehicle does not enter parking condition or, with selector lever in another position, parking condition is not cancelled.								1
	Nissan Murano Vehicle runs with CVT in P position.						2		1
	Nissan Murano Vehicle runs with CVT in N position.				2	3	1
	Engine stall.	1
	Engine stalls when selector lever shifted N → D or R.	1
	Does not shift			1
Other	When brake pedal is depressed with ignition switch ON, selector lever cannot be shifted from P position to other position.									1	2	3
Other	When brake pedal is not depressed with ignition switch ON, selector lever can be shifted from P position to other position.									1	2	3

Shift Lock System

Component Function Check CHECK SHIFT LOCK OPERATION (PART 1) Ignition switch ON. Shift the selector lever to “P” (Park) position. Attempt to shift the selector lever to any other position with the brake pedal released...

Periodic Maintenance. Cvt Fluid

Inspection FLUID LEAKAGE Check transaxle surrounding area (oil seal and plug etc.) for fluid leakage. If transaxle appears to have oil seepage or a leak, follow the steps below to assist in a correct diagnosis...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B1341 Head Unit

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B1341–16 Head unit (AV control unit) [VB–LOW] Diagnosis condition When ignition switch is ON. Signal (terminal) – Threshold – Diagnosis delay time 30 seconds or more B1341–17 [VB–HIGH] Diagnosis condition When ignition switch is ON...

Nissan Murano (Z52) 2015-2024 Service Manual: P0462 Fuel Level Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0462 FUEL LEVL SEN/CIRC (Fuel level sensor “A” circuit low) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel level sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0463 FUEL LEVL SEN/CIRC (Fuel level sensor “A” circuit high) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel level sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEDTC P0462 Harness or connectors (The CAN communication line is open or shorted) Harness or connectors (The sensor circuit is open or shorted) Combination meter Fuel level sensor DTC P0463 Harness or connectors (The CAN communication line is open or shorted) Harness or connectors (The sensor circuit is open or shorted) Combination meter Fuel level sensor FAIL-SAFENot applicable DTC Confirmation Procedure CHECK DTC PRIORITY If DTC P0462 or P0463 is displayed with DTC UXXXX or P0607, first perform the confirmation procedure for DTC UXXXX or P0607...