Nissan Murano: Starting and driving / Driving the vehicle

Starting the engine

Apply the parking brake. Move the shift lever to P (Park) or N (Neutral). P (Park) is recommended. The starter is designed not to operate unless the shift lever is in either P (Park) or N (Neutral)...

Continuously Variable Transmission, CVT

WARNING Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Reverse), D (Drive), or M (Manual shift mode). Always depress the brake pedal until shifting is completed...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Door Outside Molding

Exploded View 1. Front door panel 2. Front door outside molding 3. Rear door panel 4. Rear door outside molding Pawl Removal and Installation FRONT DOOR OUTSIDE MOLDINGRemovalLower front door glass. Remove door mirror. Refer to Removal and Installation...

Nissan Murano (Z52) 2015-2024 Service Manual: P1800 Vias Control Solenoid Valve 1

DTC Description DTC DETECTION LOGICAn excessively low or high voltage signal is sent to ECM through the VIAS control solenoid valve 1. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P1800 VIAS S/V CIRC-B1 (VIAS solenoid valve circuit bank 1) Diagnosis condition Start engine and let it idle Signal (terminal) VIAS control solenoid valve 1 signal Threshold An excessively low or high voltage signal is sent to ECM Diagnosis delay time — POSSIBLE CAUSE Harness or connectors (Input speed sensor circuit is open or shorted) VIAS control solenoid valve 1 FAIL-SAFENot applicable DTC Confirmation Procedure CONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test...