Nissan Murano: Removal and Installation / Door Mirror Turn Signal Lamp
Removal and Installation
The door mirror turn signal lamp is serviced as part of the door mirror. Refer to Removal and Installation.
Exploded View
1.
Front fog lamp
2.
Front bumper fascia
A.
Front fog lamp harness connector
Removal and Installation
REMOVALPartially remove front fender protector...
Exploded View
1.
Optical sensor
2.
Defroster grille
A.
Harness connector
Pawl
Removal and Installation
REMOVALUsing a suitable tool, release pawls and remove optical sensor (2) from defroster grille (1)...
Other information:
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning...
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P1225
CTP LEARNING-B1
(Closed throttle position learning performance)
Diagnosis condition
Ignition switch ON
Signal (terminal)
Electric throttle control actuator signal
Threshold
Closed throttle position learning value is excessively low
Diagnosis delay time
—
POSSIBLE CAUSE
Electric throttle control actuator
(TP sensor 1 and 2)
FAIL-SAFENot applicable
DTC Confirmation Procedure
PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test...