Other information:
Exploded View
1.
Spiral cable
2.
Steering angle sensor
A.
Spiral cable screws
B.
Steering angle sensor screws
C.
Locating pin
Removal and Installation
WARNING:
Before servicing the SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes...
DTC Description
DTC DETECTION LOGICAn EOP sensor signal voltage applied to ECM remains lower than the specified value continuously for 10 seconds or more when the engine speed is 1,000 rpm or more. DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0524
ENGINE OIL PRESSURE
(Engine oil pressure too low)
Diagnosis condition
—
Signal (terminal)
Voltage signal transmitted from EOP sensor signal to ECM
Threshold
An EOP sensor signal voltage applied to ECM remains lower than the specified value continuously when the engine speed is 1,000 rpm or more
Diagnosis delay time
10 seconds or more
POSSIBLE CAUSE
Decrease in engine oil pressure
Decrease in engine oil level
Engine oil condition
EOP sensor
Cause of engine oil consumption
FAIL-SAFE Engine operating condition in fail-safe mode
Fail safe mode Nissan Murano Vehicle behavior
Engine oil pressure
ECM illuminates oil pressure warning lamp on the combination meter...