Nissan Murano: Ducts and Grilles / Defroster Nozzle
Removal and Installation
REMOVAL
Remove the side defroster ducts (LH/RH). Refer to Removal and Installation.
Remove the screws and defroster nozzle.
INSTALLATION
Installation is in the reverse order of removal.
Exploded View
FRONT 1.
Defroster nozzle
2.
Side defroster duct (LH)
3.
Center ventilator duct
4.
Heating and cooling unit
5.
Front floor connecting duct (LH)
6...
Removal and Installation - Front Floor Connecting Duct
REMOVALRemove the center console side finisher. Refer to Exploded View.
Remove the front floor connecting duct...
Other information:
Use of Protectors
Use of work clothes should be the same as for “PROTECTORS”. Refer to Protectors.
Wear a safety helmet and safety shoes.
When working under a Nissan Murano vehicle or when using a grinder, wear goggles.
Precautions while Working
To prevent danger in case the clamp slips or the panel breaks, be sure to apply a safety chain...
Component Function Check
DATA MONITOR
CONSULT
Select “TILT SW-UP”, “TILT SW-DOWN” in “Data Monitor” mode of “AUTO DRIVE POS.”.
Check that the function operates normally according to the following conditions:
Monitor item Condition Status
TILT SW-UP
Tilt switch (up)
Operate
ON
Release
OFF
TILT SW-DOWN
Tilt switch (down)
Operate
ON
Release
OFF
Is the inspection result normal?
YES>>
Inspection End...