Nissan Murano: System Description / Component Parts. Navigation Without Bose

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Audio, Visual & Navigation System :: Navigation Without Bose / System Description / Component Parts. Navigation Without Bose

Component Parts Location

No. Component Function
1. Rear door speaker RH Refer to Speakers.
2. Microphone Refer to Microphone.
3. Front door speaker RH Refer to Speakers.
4. Instrument panel tweeter RH
5. ECM (Engine Control Module)

Provides AV control unit with engine RPM signal via CAN communication.

Refer to Component Parts Location for detailed component location.
6. IPDM E/R (Intelligent Power Distribution Module Engine Room)

Provides AV control unit with battery voltage signal via CAN communication.

Refer to Component Parts Location for detailed component location.
7. Instrument panel tweeter LH Refer to Speakers.
8. BCM (Body Control Module)

Provides AV control unit with door switches state signals via CAN communication.

Refer to Component Parts Location for detailed component location.
9. Front door speaker LH Refer to Speakers.
10. Rear door speaker LH
11. AV control unit Refer to AV Control Unit.
12. Combination switch (spiral cable) Refer to Combination Switch (Spiral Cable).
13. Combination meter Refer to Combination Meter.
14. GPS antenna Refer to Antenna and Antenna Feeder.
15. Steering switches Refer to Steering Switches.
16. Front auxiliary input jacks Refer to Front Auxiliary Input Jacks.
17. Front auxiliary input jacks control unit Refer to Front Auxiliary Input Jacks Control Unit.
AV Control Unit
  • A 8-inch color display with multi-touch control, an AM/FM HD electronic tuner radio with RDS, CD drive, audio amplifier and camera controller are integrated into the AV control unit.

  • The 8-inch color display is a high resolution monitor that includes touch panel functions.

  • Music files stored in iPod®*/USB memory can be played using the separate USB interface.

  • Music files stored in an external audio device can be played using the separate AUX input jack.

*: iPod® is a registered trademark of Apple, Inc. All rights reserved.

Speakers

INSTRUMENT PANEL TWEETER

  • 5.01 cm (2 in) tweeters are installed in the top corners of the instrument panel.

  • Sound signals generated by the AV control unit output high range sounds.

FRONT DOOR SPEAKER

  • 16.5 cm (6.5 in) speakers are installed in the bottom of the front doors.

  • Sound signals generated by the AV control unit output low range sounds.

REAR DOOR SPEAKER

  • 16.5 cm (6.5 in) speakers are installed in the bottom of the rear doors.

  • Sound signals generated by the AV control unit output high, mid and low range sounds.

USB Interface and AUX In Jack
  • Front auxiliary input jacks are installed in the console.

  • iPod® and USB memory can be connected to the AV control unit through the type-A and type-C USB interfaces.

  • An external audio device can be connected to the AV control unit through the AUX input jack.

Front Auxiliary Input Jacks Control Unit
  • Front auxiliary input jacks control unit is installed underneath the A/C switch assembly.

  • The USB interface signals from the front auxiliary input jacks are transferred to the AV control unit.

Steering Switches
  • Steering switches are installed in the steering wheel.

  • Operations for audio and hands-free phone are possible.

  • Switches are connected to the combination meter.

  • Combination meter is connected to the AV control unit via AV communication.

Microphone
  • The microphone is installed in the roof in the map lamp assembly.

  • The power is supplied from the AV control unit.

Combination Switch (Spiral Cable)
  • Combination switch (spiral cable) is installed on the combination switch.

  • Steering switch signals pass through the combination switch (spiral cable) to the combination meter.

  • Combination meter sends the steering switch signals to the AV control unit via AV communication.

Combination Meter
  • Combination meter sends the speed signal to the AV control unit via CAN communication.

  • Steering switches are connected to the combination meter through the combination switch (spiral cable).

  • Combination meter sends the steering switch signals to the AV control unit via AV communication.

Antenna and Antenna Feeder

GPS ANTENNA

  • GPS antenna is installed in the instrument panel.

  • Power is supplied from the AV control unit.

  • This antenna amplifies radio waves received from the GPS satellite and transmits the GPS signal to the AV control unit.

NOTE:

An object on the instrument panel may cause the reception sensitivity to be decreased.

ANTENNA BASE

  • Antenna base is installed on the rear center of the roof.

  • Antenna base incorporates the satellite antenna, AM/FM antenna and antenna amp.

  • Receives satellite radio waves and outputs them to AV control unit.

  • Receives AM/FM radio waves and outputs them to AV control unit.

ANTENNA SIGNAL PATH

  • AM/FM radio antenna located in the antenna base.

  • The AM/FM radio antenna has an antenna amp. to obtain sufficient reception power.

ANTENNA FEEDER LAYOUT

1. Antenna base 2. R202, R203 3. R102, R200
4. R103, R201 5. M99, R100 6. M98, R101
7. M164, M165, M167 8. GPS antenna    

    System Description

    ..

    System

    System Description SYSTEM DIAGRAMAV Control Unit Input Signal (AV Communication)Transmit unitSignal name Combination meter Steering switch signal AV Control Unit Input Signal (CAN Communication)Transmit unitSignal name BCM Door switches state signal Combination meter Nissan Murano Vehicle speed signal Hand brake switch signal ECM Engine RPM Signal IPDM E/R Battery voltage signal AUDIO SYSTEMThe audio system consists of the following components: AV control unit Instrument panel tweeters Front door speakers Rear door speakers Front auxiliary input jacks Front auxiliary input jacks control unit Microphone Steering switches Combination meter Combination switch (spiral cable) Accessory relay-2 Antenna base (AM/FM antenna, antenna amp...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: Door Mirror Glass


    Removal and Installation REMOVALApply protective tape to door mirror. Release metal clips and pawls that retain door mirror glass using a suitable tool, disconnect harness connectors (A)(if equipped) from door mirror glass and remove. : Metal clip : PawlINSTALLATIONInstallation is in the reverse order of removal...

    Nissan Murano (Z52) 2015-2024 Service Manual: P2096 A/f Sensor 1


    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2096 POST CAT FUEL TRIM SYS B1 (Post catalyst fuel trim system too lean bank 1) Diagnosis condition — Signal (terminal) — Threshold The output voltage computed by ECM from the A/F sensor 1 signal is shifts to the lean side for a specified period Diagnosis delay time — P2097 POST CAT FUEL TRIM SYS B1 (Post catalyst fuel trim system too rich bank 1) Diagnosis condition — Signal (terminal) — Threshold The A/F signal computed by ECM from the A/F sensor 1 signal is shifts to the rich side for a specified period Diagnosis delay time — P2098 POST CAT FUEL TRIM SYS B2 (Post catalyst fuel trim system too lean bank 2) Diagnosis condition — Signal (terminal) — Threshold The output voltage computed by ECM from the A/F sensor 1 signal is shifts to the lean side for a specified period Diagnosis delay time — P2099 POST CAT FUEL TRIM SYS B2 (Post catalyst fuel trim system too rich bank 2) Diagnosis condition — Signal (terminal) — Threshold The A/F signal computed by ECM from the A/F sensor 1 signal is shifts to the rich side for a specified period Diagnosis delay time — POSSIBLE CAUSEDTC P2096 A/F sensor 1 (bank 1) A/F sensor 1 heater Heated oxygen sensor 2 (bank 1) Fuel pressure Fuel injector Intake air leaks Exhaust gas leaks DTC P2097 A/F sensor 1 (bank 1) A/F sensor 1 heater Heated oxygen sensor 2 (bank 1) Fuel pressure Fuel injector Intake air leaks Exhaust gas leaks DTC P2098 A/F sensor 1 (bank 2) A/F sensor 1 heater Heated oxygen sensor 2 (bank 2) Fuel pressure Fuel injector Intake air leaks Exhaust gas leaks DTC P2099 A/F sensor 1 (bank 2) A/F sensor 1 heater Heated oxygen sensor 2 (bank 2) Fuel pressure Fuel injector Intake air leaks Exhaust gas leaks FAIL-SAFENot applicable DTC Confirmation Procedure PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test...

    Categories

    Vehicle security system

    Nissan Murano. Vehicle security system

    Your vehicle has two types of security systems:

    Vehicle security system NISSAN Vehicle Immobilizer System

    The vehicle security system provides visual and audible alarm signals if someone opens the doors, liftgate or the hood when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.

    read more

     
    Copyright © 2025 www.nimurano.com