Nissan Murano: Starting and driving / Brake system
The brake system has two separate hydraulic
circuits. If one circuit malfunctions,
you will still have braking at two wheels.
WARNING
If the engine is not running or is
turned off while driving, the power assist
for the steering will not work.
Steering will be harder to operate...
Vacuum assisted brakes
The brake booster aids braking by using
engine vacuum. If the engine stops, you
can stop the vehicle by depressing the
brake pedal...
Other information:
Removal and Installation
REMOVALRemove disc brake rotor. Refer to Removal and Installation.
Remove wheel sensor bolt (A) and position wheel sensor aside. Refer to Exploded View.
CAUTION:
Failure to separate front wheel sensor from steering knuckle may result in damage to front wheel sensor...
Component Function Check
CHECK FUNCTION
CONSULT
Select “HOOD SW” and "HOOD SW 2" in “Data Monitor” mode of “IPDM E/R”.
Check “HOOD SW” and "HOOD SW 2" indication under the following conditions:
Monitor item Condition Indication
HOOD SW
Hood
Open
OFF
Close
ON
HOOD SW 2
Open
ON
Close
OFF
Is the indication normal?
YES>>
Hood switch is OK...