Nissan Murano: Basic Inspection / Additional Service When Replacing Adas Control Unit

Nissan Murano (Z52) 2015-2024 Service Manual / Cruise Control & Driver Assistance / Driver Assistance System :: Adas Control Unit / Basic Inspection / Additional Service When Replacing Adas Control Unit

Description

Always perform the ADAS control unit configuration after replacing the ADAS control unit.

Work Procedure

ADAS CONTROL UNIT CONFIGURATION

CONSULT

Perform the ADAS control unit configuration. Refer to Description.

GO TO 2.

PERFORM SELF-DIAGNOSIS

CONSULT

Turn ignition switch ON.
Select “Self Diagnostic Result” mode of “ICC/ADAS”.
Check DTC.

Is DTC detected?

YES>>

Perform the trouble diagnosis for the detected DTC. Refer to DTC Index.

NO>>

Inspection End.

Basic Inspection

Configuration (adas Control Unit)

Description Since vehicle specifications are not included in the ADAS control unit after replacement, it is required to write Nissan Murano vehicle specifications using CONSULT...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: B133a Avm Connection

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B133A-8F AVM connection (Camera image signal) Diagnosis condition When ignition switch is ON. Signal (terminal) Camera image signal circuit (terminal 49) Threshold — Diagnosis delay time — POSSIBLE CAUSE Camera image signal circuit Around view monitor control unit AV control unit FAIL-SAFECamera image is inoperative DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Service Manual: Sunshade

Diagnosis Procedure PERFORM INITIALIZATION PROCEDURE Refer to Special Repair Requirement. Is the inspection result normal? YES>> Sunshade system is normal. NO>> GO TO 2. CHECK SUNSHADE SWITCH Check sunshade switch. Refer to Diagnosis Procedure...