Nissan Murano: Front Rh Side Power Window Does Not Operate / When Main Power Window and Door Lock/unlock Switch Is Operated

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Power Window Control System :: Symptom Diagnosis / Front Rh Side Power Window Does Not Operate / When Main Power Window and Door Lock/unlock Switch Is Operated

Diagnosis Procedure

CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Check power window and door lock/unlock switch RH serial link circuit.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CONFIRM THE OPERATION

Confirm the operation again.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

GO TO 1.

Front Rh Side Power Window Does Not Operate

When Power Window and Door Lock/unlock Switch Rh Is Operated

Diagnosis Procedure REPLACE POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH Replace power window and door lock/unlock switch RH. Refer to Removal and Installation...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0112 Iat Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0112 IAT SEN/CIRCUIT-B1 (Intake air temperature sensor 1 circuit low bank 1) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from intake air temperature sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0113 IAT SEN/CIRCUIT-B1 (Intake air temperature sensor 1 circuit high bank 1) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from intake air temperature sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEP0112 Harness and connectors (The sensor circuit is open or shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: U1a06 Usb Comm

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U1A06 TEL ANTENNA ERROR (TEL antenna error) Diagnosis condition When ignition switch is ON. Signal (terminal) TEL antenna signal Threshold No input Diagnosis delay time — POSSIBLE CAUSE TEL antenna signal circuit TEL antenna TCU FAIL-SAFE Telematics switch LED indicator turned OFF (LED indicator turns ON 10 times when SOS call switch is pressed) When telematics system is operated, inform that system cannot be connected to NissanConnect center DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...