Nissan Murano: Do-it-yourself / Wheels and tires
If you have a flat tire, refer to the “In case of emergency” section of this manual.
Exterior and interior lights
* It is recommended that you visit a NISSAN dealer for replacement.
Always check with the Parts Department at a NISSAN dealer for the latest
parts information...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Power Steering Fluid and Lines
Inspection FLUID LEVELVerify proper power steering fluid level. Check power steering fluid level with engine stopped and the fluid temp between 0 – 30° C (32 – 86° F). Power steering fluid level should be within the range shown on the power steering reservoir cap indicator...
Nissan Murano (Z52) 2015-2024 Service Manual: Operation Inspection
Work Procedure DESCRIPTIONThe purpose of the operational check is to check that the individual system operates normally. Check condition : Engine running at normal operating temperature. OPERATION INSPECTIONCHECK MEMORY FUNCTION Set temperature control (driver side) to 89°F or 90°F (32°C)...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Tire rotation
- Memory storage function (key-link)
- Jacking up vehicle and removing the damaged tire
- New on site
- Most important about car
LATCH (Lower Anchors and Tethers for CHildren) system
LATCH system lower anchor locations - bench seat
Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
