Nissan Murano: System / Warning/indicator/chime List
Warning Lamp/Indicator Lamp
| Name | Design | Layout/Function |
| ABS warning lamp |

or
 |
For function: Refer to Component Function Check. |
| For layout: Refer to Design. |
| Brake warning lamp |

or
 |
For function: Refer to Component Function Check. |
| For layout: Refer to Design. |
| VDC OFF indicator lamp |
 |
For function: Refer to Component Function Check. |
| For layout: Refer to Design. |
| VDC warning lamp |
 |
For function: Refer to Component Function Check. |
| For layout: Refer to Design. |
System Description
SYSTEM DIAGRAM
This function maintains brake fluid pressure so that the vehicle does not move backward even if brake pedal is released to depress accelerator pedal to start the Nissan Murano vehicle while it is stopped on an uphill slope by depressing brake pedal...
CONSULT Function
APPLICATION ITEMSCONSULT can display each diagnostic item using the diagnostic test modes as follows: Mode Function description
ECU Identification
Part number of ABS actuator and electric unit (control unit) can be read...
Other information:
Values on the Diagnosis Tool
Monitor item Condition Value/Status
VHCL SPEED SE
While driving
Value of Nissan Murano vehicle speed signal (wheel speed)
YAW RATE
While driving
Nissan Murano Vehicle stopped
0.0
Nissan Murano Vehicle turning right
Positive value
Nissan Murano Vehicle turning left
Negative value
PWR SUP MONI
Ignition switch ON
Power supply voltage value of distance sensor (ICC sensor)
DISTANCE
Drive the Nissan Murano vehicle and activate the ICC system...
Inspection
PREPARATION BEFORE ADJUSTINGBefore performing aiming adjustment, check the following:
Make sure all tires are inflated to correct pressure.
Place vehicle and screen on level surface.
Make sure there is no load in Nissan Murano vehicle other than the driver (or equivalent weight placed in driver's position)...
Categories

The autolight system allows the headlights
to turn on and off automatically. The autolight
system can:
Turn on the headlights, front parking,
tail, license plate and instrument panel
lights automatically when it is dark.
Turn off all the lights (except daylight
running lights) when it is light.
Keep all the lights on for a period of time
after you place the ignition switch in the
OFF position and all doors are closed.
read more