Nissan Murano: Rear Automatic Braking (RAB) (if so equipped) / System maintenance

Observe the following items to ensure
proper operation of the system:
- Always keep the parking sensors
clean.
- If the parking sensors are dirty, wipe
them off with a soft cloth while being
careful to not damage them.
- Do not subject the area around the
parking sensors
to strong
impact.
Also, do not remove or disassemble the
parking sensors. If the parking sensors
and peripheral areas are deformed in
an accident, etc., have the sensors
checked. It is recommended that you
visit a NISSAN dealer for this service.
- Do not install any stickers (including
transparent stickers) or accessories on
the parking sensors
and their
surrounding
areas. This may cause a malfunction
or improper operation.
If the RAB system malfunctions, it will be
turned off automatically, and the RAB system
warning light will illuminate in the vehicle
information display...
WARNING
Failure to follow the warnings and instructions
for proper use of the AEB
system could result in serious injury or
death.
The AEB system is a supplemental aid
to the driver...
Other information:
Removal and Installation
REMOVALRemove bolts and front door striker.INSTALLATIONInstallation is in the reverse order of removal.CAUTION:
Do not reuse front door striker bolts.
After installation, check front door open/close operation. If necessary, adjust front door striker...
During the normal day-to-day operation of
the vehicle, general maintenance should
be performed regularly as prescribed in
this section. If you detect any unusual
sounds, vibrations or smells, be sure to
check for the cause or have it checked
promptly...