Nissan Murano: Engine Cooling System :: Vq35de / System Description

Nissan Murano (Z52) 2015-2024 Service Manual / Engine / Engine Cooling System :: Vq35de / System Description

Preparation. Preparation

Special Service Tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description KV10111100 (J-37228) Seal cutter Removing chain tensioner cover and water pump cover KV991J0070 (J-45695-A) Coolant refill tool Refilling engine cooling system KV991J0010 (J-23688) Engine coolant refractometer Checking concentration of ethylene glycol in engine coolant  —  (J-51771) Cooling system pressure test kit  —  (J-51771-1) Main body  —  (J-51771-4) Small adapter  —  (J-51771-5) Pump with quick release  —  (J-51771-9) Radiator cap assembly with quick coupler Checking cooling system and radiator cap Commercial Service Tools (TechMate No...

Overheating Cause Analysis

Troubleshooting Chart   Symptom Check items Cooling system parts malfunction Poor heat transfer Water pump malfunction Worn or loose drive belt Engine coolant circulation Thermostat stuck closed Thermostat Damaged radiator fins Dust contamination or paper clogging — Physical damage Clogged radiator cooling tube Excess foreign material (rust, dirt, sand, etc...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Evap Vapor Lines


Work Procedure CAUTION: Never use compressed air or a high pressure pump. Never exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP system. NOTE: Do not start engine. Improper installation of EVAP service port adapter (commercial service tool) to the EVAP service port may cause a leakage...

Nissan Murano (Z52) 2015-2024 Service Manual: Air Bag Diagnosis Sensor Unit


Exploded View 1. Air bag diagnosis sensor unit Front Removal and Installation WARNING: Before servicing SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes. Before disconnecting air bag diagnosis sensor unit harness connectors, be sure to disconnect each harness connector of side curtain air bag modules, front seat belt pre-tensioner, and front side air bag module, to prevent accidental air bag deployment by static electricity and seat belt pre-tensioner operation...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

read more

 
Copyright © 2026 www.nimurano.com