Nissan Murano: Do-it-yourself / Spark plugs

REPLACING SPARK PLUGS
Iridium-tipped spark plugs
It is not necessary to replace iridiumtipped
spark plugs as frequently as
conventional
type spark plugs because they
last much longer. Follow the maintenance
log shown in the “Maintenance and schedules”
section of this manual. Do not service
iridium-tipped spark plugs by cleaning or
regapping.
- Always replace spark plugs with recommended
or equivalent ones.
WARNING
Be sure the engine and ignition switch
are off and that the parking brake is
engaged securely.
CAUTION
Be sure to use the correct socket to remove
the spark plugs. An incorrect
socket can damage the spark plugs.
If replacement is required, it is recommended
that you visit a NISSAN dealer for
this service.
VQ35DE engine
Crankshaft pulley
Drive belt automatic tensioner pulley
Generator pulley
Air conditioner compressor pulley
WARNING
Be sure the ignition switch is placed in
the OFF or LOCK position before servicing
drive belt...
The air cleaner filter should not be cleaned
and reused. Replace it according to the
maintenance log shown in the "Maintenance
and schedules" section of this
manual...
Other information:
CONSULT Function
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must be cycled OFF → ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go to "sleep mode", potentially causing a discharged battery and a no-start condition...
To cancel a Remote Engine Start, perform
one of the following:
Aim the Intelligent Key at the vehicle
and press until the parking
lights
turn off.
Turn on the hazard warning flashers.
Cycle the ignition switch on and then
off.
The extended engine run time has expired...