Nissan Murano: Basic Inspection / Service After Replacing or Removing Engine Parts

Nissan Murano (Z52) 2015-2024 Service Manual / Engine / Engine Control System :: Vq35de / Basic Inspection / Service After Replacing or Removing Engine Parts

Description

SPECIAL REPAIR REQUIREMENT

×: Applicable

Part name	Service performed		Required service	Reference
Part name	Replacement	Removal^*1	Required service	Reference
ECM	×		Additional service when replacing ECM	Description
		×	Accelerator pedal released position learning	Description
			Throttle valve closed position learning	Description
			Idle air volume learning	Description
			VIN registration	Description
Accelerator Pedal	×	×	Accelerator pedal released position learning	Work Procedure
Electric throttle	×	×	Throttle valve closed position learning	Work Procedure
Electric throttle	×		Idle air volume learning	Work Procedure
Engine assembly	×		Throttle valve closed position learning^*2	Work Procedure
	×		Idle air volume learning^*2	Work Procedure
		×	Accelerator pedal released position learning	Work Procedure
		×	Throttle valve closed position learning^*2	Work Procedure

*1: Harness connector disconnection included.

*2: Replacement of engine with a electric throttle.

Diagnosis and Repair Workflow

Work Flow OVERALL SEQUENCE *1: Include 1st trip DTC. *2: Include 1st trip freeze frame data. DETAILED FLOWGET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the “Diagnostic Work Sheet”...

Additional Service When Replacing Ecm

Description When replacing ECM, the following procedure must be performed. (For details, refer to Work Procedure.)CAUTION: When replacing the ECM, always replace it with a new one...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Power Supply and Ground Circuit. Distance Sensor (icc Sensor)

Diagnosis Procedure CHECK FUSES Check that the following fuse is not blown: Signal name Fuse No. Ignition power supply 29 (10A) Is the fuse blown? YES>> Replace the blown fuse after repairing the affected circuit. NO>> GO TO 2...

Nissan Murano (Z52) 2015-2024 Service Manual: Intelligent Key System/engine Start Function

System Description SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNAL CHART Component Signal description ECM Mainly transmits the following signal to BCM and combination meter via CAN communication. Engine status signal Mainly receives the following signal from BCM via CAN communication...