Nissan Murano: Power Control System :: Ipdm E/r / Removal and Installation. Ipdm E/r (intelligent Power Distribution Module Engine Room)
Exploded View

| 1. |
IPDM E/R |
2. |
IPDM E/R Case |
Removal and Installation
CAUTION:
-
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.
-
Do not use a unit which has been dropped.
REMOVAL
Disconnect the negative battery terminal. Refer to Removal and Installation.
Release the pawls and separate the IPDM E/R (1) from the case.

: Pawl
Disconnect all harness connectors (A) from the IPDM E/R (1).

INSTALLATION
Installation is in the reverse order of removal.
Diagnosis Procedure
CHECK FUSIBLE LINKS
Check that the following fusible links are not blown:
Terminal Signal name Fusible link No. Capacity
1
Battery power supply
E
80 A
2
A
250 A
C
80 A
3
A
250 A
B
100 A
N
40 A
Is the fusible link blown?
YES>>
Replace the blown fusible link after repairing the affected circuit...
Other information:
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Removal and Installation
REMOVALRemove instrument panel tweeter grille (LH\RH). Refer to Exploded View.
Disconnect the harness connector from instrument panel tweeter and remove screws (A) to remove instrument panel tweeter (1).
(2): Instrument panel assembly
: FrontINSTALLATIONInstallation is in the reverse order of removal...