Other information:
DTC Description
DTC DETECTION LOGIC
An excessively low voltage from the sensor is sent to ECM.
An excessively high voltage from the sensor is sent to ECM.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0117
ECT SEN/CIRC
(Engine coolant temperature sensor 1 circuit low)
Diagnosis condition
Ignition switch ON
Signal (terminal)
Voltage signal transmitted from engine coolant temperature sensor to ECM
Threshold
An excessively low voltage from the sensor is sent to ECM
Diagnosis delay time
—
P0118
ECT SEN/CIRC
(Engine coolant temperature sensor 1 circuit high)
Diagnosis condition
Ignition switch ON
Signal (terminal)
Voltage signal transmitted from engine coolant temperature sensor to ECM
Threshold
An excessively high voltage from the sensor is sent to ECM
Diagnosis delay time
—
POSSIBLE CAUSEP0117
Harness or connectors (The sensor circuit is open or shorted...
Component Function Check
CHECK FRONT WIPER STOP POSITION SIGNAL
CONSULT
Select “WIP AUTO STOP” in “Data Monitor” mode of “IPDM E/R”.
Operate the front wiper.
Check that the function operates normally according to the following conditions:
Monitor item Condition Monitor status
WIP AUTO STOP
Front wiper motor
Stop position
STOP P
Except stop position
ACT P
Is the inspection result normal?
YES>>
Front wiper stop position signal circuit is normal...